| Channels | 5 - 3 |
| POWER SUPPLY | |
| Power supply voltage / fuse: | 22 ÷ 33 VDC / 2 x 15 A |
| ldling current (power ON/OFF): | 1 A / 0.04 mA |
| Consumption@ 1Ω, 14.4 VDC (Max Musical Power): | 15 A |
| Remote In: | 7 ÷ 33 VDC - 1 mA |
| ART: | Automatic Remote Turn-OniOff with Speaker-ln |
| AMPLIFIER STAGE | |
| Distorsion - TliD (100Hz @ 4Ω): | 0.02% |
| Bandwidth: | 10 ÷ 50 kHz |
| Bandwidth: | 10 ÷ 500 Hz |
| S/N Ratlo (A welghted @ 1 V): | 100 dB |
| Damping factor (100Hz @ 4Ω) FRONT/REAR: | 100 |
| Damping factor (100Hz @ 4Ω) SUB: | 250 |
| Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
| Speaker-ln sensitivity: | 0.8 ÷ 20 VRMS |
| Load impedance (MIN) @5Ch: @3Ch: |
2 Ω 4 Ω + 4 Ω + 2 Ω |
| Max size (mm/in): | 345 x 190 x 50 13.58 x 7.48 x 1.97 |
| Weight (kg/lb): | 3 (6.61) |
| Adjustable Crossovers | yes |
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% | |
| 5Ch | 55 W x 4+160 W x 1 (4Ω) |
| 5Ch | 90 W x 4+ 280 W x 1 (2 Ω) |
| 3Ch | 180 W x 2 (4 Ω) +160 W x 1 (4 Ω) |
| 3Ch | 180 W x 2 (4 Ω)+280 W x 1 (2 Ω) |
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 10% | |
| 5Ch | 55 W x 4+160 W x 1 (4Ω) |
| 5Ch | 90 W x 4+ 280 W x 1 (2 Ω) |
| 3Ch | 180 W x 2 (4 Ω) +160 W x 1 (4 Ω) |
| 3Ch | 180 W x 2 (4 Ω)+280 W x 1 (2 Ω) |
| CEA 2006-A RATINGS | |
| RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): | 50 W x 4 Ch + 150 W x 1 Ch |
| S/N Ratio (ref. 1 W output) | (50 W Ch) 83 dBA (150 W Ch) 85 dBA |
| Total Power RMS | 1500 W |
| lnputs: | PRE IN l SPEAKER IN |
| FRONT Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5 kHz @ 12 dB/Oct |
| REAR Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5 kHz @ 12 dB/Oct |
| Band-Pass: | 50 ÷ 500 Hz (Hi) @ 12 dB/Oct 50 ÷ 5 kHz (Lo) @ 12 dB/Oct |
| SUB Ch. filter LO-PASS: | 50 ÷ 500 Hz (Hi) @ 24 dB/Oct |
| SUBSONIC (on/off): | 25 Hz @ 24 dB / Oct |
| BOOST 50 Hz (adjust): | (0÷12) dB |
| Remote Volume Control: | (-50 ÷ 6) dB |
| mm | in | |
| A | 345 | 13.58 |
| B | 321 | 12.64 |
| C | 190 | 7.48 |
| D | 166 | 6.53 |
| E | 50 | 1.97 |
Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable output stage.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated marine grade (epoxy coated) PCB boards.
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
