| Size mm (in.) | 380 (15) |
| Power Handling - Continuous W | 1200 |
| Power Handling - Peak W | 2400 |
| Impedance Ohm | 2+2 |
| Depth mm (in.) | 210 (8.27) |
| Voice Coil Type | dual |
| No Filter Component | SPL DUAL COIL SUBWOOFER |
| Voice Coil Ø | 75 (3) |
| Magnet size D x d x h mm (in.) | 180 x 90 x 40 (6.69 x 3.54 x 1.57) |
| Weight of one component kg (lb.) | 10,1 (22.27) |
| Magnet | Ferrite |
| Cone | Non pressed paper with cotton fibre |
| Xmech mm (in.) | 20,7 (0.81) |
| D mm | 323 |
| Xmax mm | 15,4 |
| Re Ohm | 0,96 |
| Fs Hz | 31 |
| Le mH | 1 |
| Vas I | 68,83 |
| Mms g | 361 |
| Cms mm/N | 0,07 |
| BL T*m | 10 |
| Qts | 0,61 |
| Qes | 0,66 |
| Qms | 7,4 |
| Spl dB | 88 |
| A | 390 mm | 15.35 in. |
| B | 353 mm | 13.9 in. |
| C | 210 mm | 8.27 in |
| D | 188 mm | 7.4 in. |
| Box Tech Data - Sealed Box | |
|---|---|
| Vb l(cu.ft.) | 80 (2.83) |
| Fc Hz | 42 |
| Fb Hz | - |
| Qtc | 0,83 |
| W mm(in.) | 700 (27.56) |
| H mm(in.) | 480 (18.90) |
| D mm(in.) | 330 (12.99) |
| Mounting Hole - M | 353 (13.9) |
| Wood Thickness | 19 (0.75) |
| Panels Cut List - Sealed Box | ||
|---|---|---|
| A mm(in.) | 700 x 480 (27.56 x 18.90) | Qty 2 |
| B mm(in.) | 700 x 292 (27.56 x 11.50) | Qty 2 |
| C mm(in.) | 442 x 292 (17.40 x 11.50) | Qty 2 |
| Box Tech Data - Reflex Box | |
|---|---|
| Vb l(cu.ft.) | 120 (4.24) |
| Fc Hz | - |
| Fb Hz | 38 |
| Qtc | - |
| W mm(in.) | 900 (35.43) |
| H mm(in.) | 480 (18.90) |
| D mm(in.) | 380 (14.96) |
| Mounting Hole - M | 353 (13.9) |
| Wood Thickness | 19 (0.75) |
| Dp-Port Inner diameter mm(in.) | 160 (6.3) |
| Lp-Port lenght mm(in.) | 220 (8.66) |
| Panels Cut List - Reflex Box | ||
|---|---|---|
| A mm(in.) | 900 x 480 (35.43 x 18.90) | Qty 2 |
| B mm(in.) | 900 x 342 (35.43 x 13.46) | Qty 2 |
| C mm(in.) | 442 x 342 (17.40 x 13.46) | Qty 2 |
1. 75 mm (3 in.) dual voice coil (2 + 2 Ω) developed in 4-layer configuration on a support with venting holes for a peak power of 2400 W.
2. Double layer spider with progressive profile for maximum consistency of performance over time.
3. Multilayer foam surround to ensure very high excursion, essential for generating high SPL during Bass Wars.
4. Oversized suspension and leadwires to withstand very high excursions.
5. Impressive oversized ferrite magnet assembly for maximum control.
6. 12 AWG high current Nickel-plated push connectors for a practical and safe connection.
7. Non-pressed paper cone with added cotton fiber for maximum sensitivity.
