Venezia V6 24V option is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
| Channels | 8 - 4 |
| Class | D-CLASS |
| Power supply voltage / fuse | 22 ÷ 33 VDC |
| Idling current | 1 A |
| Idling current when off | 0.04 mA |
| Consumption @ 14.4 VDC, 1Ω, Max Musical Power | 30 A |
| Remote OUT | 14÷ 33 VDC |
| Remote IN | 7 ÷ 33 VDC - 1 mA |
| Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power | <0,06% |
| Bandwidth A | 10 ÷ 42 kHz |
| S/N ratio A | 100 dB |
| Damping factor A | 130 |
| Input sensitivity Pre-In | 0.2 ÷ 5 VRMS |
| Pre In Impedance | 10 kΩ |
| Total Power | 2000 W |
| Minimum load impedance |
@6Ch: 2Ω @5Ch: 2Ω + 2Ω + 2Ω +2Ω + 4Ω @4Ch: 2Ω + 2Ω + 2Ω +4Ω + 4Ω @3Ch: 4Ω |
| Output Power (RMS) @14.4 VDC, 1% THD |
6Ch 160 W x 6 (4Ω) 6Ch 290 W x 6 (2Ω) 5Ch 160 x 4 (4Ω) + 580 x 1 (4Ω) 5Ch 290 x 4 (2Ω) + 580 x 1 (4Ω) 4Ch 160 x 2 (4Ω) + 580 x 2 (4Ω) 4Ch 290 x 2 (2Ω) + 580 x 2 (4Ω) 3Ch 580 x 3 (4Ω) |
| Adjustable Crossover | Yes |
| Input Type | A Ch. Pre in | B Ch. Pre in | C Ch. Pre in |
| Filter Pass A | Ch. A filters: MONO IN (on/off) Yes | By-pass Yes | Hi-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct |
| Filter Pass B | Ch. B filters: MONO IN (on/off) Yes | By-pass Yes | Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct | Band-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct |
| Filter Pass C | Ch. C filters: MONO IN (on-off) Yes | By-pass Yes | Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct | Lo-pass: 50 ÷ 500 Hz @ 12 dB/Oct | Bass boost 50 Hz (adjust): (0 ÷ 12) dB |
Hertz Advanced Class D architecture maximizes efficiency and power while minimizing heat and electromagnetic radiation – without penalizing sound quality! High-powered channels with bridging capability deliver the output levels needed in the marine environment.
Electronics components corrosion caused by exposure in wet environments is totally neutralized by the use of dedicated marinegrade (epoxy coated) PCB boards.
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
Hi-Res certified performance, with an extended audio band up to 40 kHz.
This Hertz Marine amplifier is IPX2 certified when installed vertically with connections facing downward.